Type a plain http address, such as http://neverssl.com, into the browser's address bar while you are joined to the network. The network answers with the sign-in page. An https address can pass straight through to the internet, so it never calls the page up.
What the login page is
The page has a name: the captive portal. Teal: it belongs to the network, not the phone, and hotels, cafes and airports run one so a visitor accepts terms or pays.
Until you sign in, the router holds every destination behind a wall and lets only the sign-in host through; that is why a bookmark times out and the portal answers.
Trigger it with a plain address
Amber: the address bar stands in for the cable. Type the address with http:// in front and press Enter; if a search page comes back, retry.
- http://neverssl.com, a plain http page; its footer holds one https link.
- http://captive.apple.com, Apple's own probe page.
- http://connectivitycheck.gstatic.com/generate_204, blank, then redirecting.
- The default gateway, 192.168.0.1 or 192.168.1.1 on many home routers; a changed address differs.
When a page loads, accept the terms or type the desk's code.
What stops the page from loading
Check what the network is meant to hand out first: the table gives each maker's guest network in the maker's words, and a page appears only where a portal or hotspot runs.
| Network | What the visitor meets | Sign-in | Limit the maker states |
|---|---|---|---|
| NETGEAR Nighthawk | NETGEAR-Guest and NETGEAR-5G-Guest, WPA2 default | WPA2 key | WiFi 5 to 6E models only; app steps differ |
| TP-Link Wi-Fi routers | Advanced > Guest Network > Wireless | Custom name and WPA or WPA2 Personal key | No internet in access-point mode |
| Google Nest Wifi and Google Wifi | Guest network in the Google Home app | Guest name and password, then shared devices | Password must differ from the main one |
| eero | Enable guest network in the eero app | Guest key | Separate subnet; name must differ; no main devices or guest-to-guest |
| Xfinity WiFi Gateway | No separate guest SSID | Main key by QR code, text or email, or the xfinitywifi hotspot | Hotspot needs an Xfinity account; others need the main key |
| Verizon Router CR1000A | Off at the factory; guest name is the default name plus -Guest | Password you set | Firewall-separated |
Only the Xfinity row mentions a hotspot; the rest only hand over a key, so a missing portal is normal. No guest switch is printed in the Xfinity password article, so that row leans on the separate sharing guide.
Turn off what hides the redirect
Teal: two phone settings hide the intercept, and both must come off on a public network.
iCloud Private Relay sends Safari traffic through Apple, where the network cannot redirect it. Turn it off under Settings > your name > iCloud > Private Relay.
DNS over HTTPS encrypts the lookup. Android: Settings > Network & internet > Private DNS, then Off. iOS: Settings > Wi-Fi, the (i), Configure DNS, Manual.
Red: a VPN outranks the portal; disconnect it for the test.
Rejoin the network
Red: the saved join carries the stale result. Forget the network, rejoin by hand, and take a fresh lease.
Teal: the Wi-Fi list is where this happens. On iOS, the (i) beside the name, then Forget This Network. On Android, a long press, then Forget.
Join where the signal is strong and let the first request run; on an open or code-based network the page returns on the join.
When the portal is simply down
No setting helps if the network has nothing to serve. The sign-in box sits on the operator's side; where the controller behind it is unreachable, guests see timeout errors.
An internet light that stays dark, or repeated timeouts on a known network, points at the line. Ask the desk whether the portal is up.
On a home guest network the key is the whole sign-in, shared by the owner (Xfinity prints QR, text or email); connecting to a router reaches the admin page and changing the Wi-Fi password the key. The guest network walkthrough has the switch.
Questions
Why does the login page not load on my phone?
A phone hides the portal: Private Relay, private DNS or a VPN sits in the path, and an https page slips through. Turn those off, open an http address, then forget and rejoin.
Does the page work on HTTPS?
Not as a trigger. An https address is already encrypted, so the network cannot insert the redirect; the page loads only if the portal sits there.