Skip to main content

Port labels, addresses and setup pages from vendor documentation · checked Nov 2026 · Methodology

How to connect to a router

ResetWANLAN 1LAN 2LAN 3LAN 4PowerSSID ROUTER-4B21
Setup 192.168.0.1
Password printed below
Wi-Fi
A wired device takes a LAN port; the WAN port stays with the modem.

By RouterPanel Editorial · Updated

Short answer

Plug an Ethernet cable into a LAN port on the router, or join its Wi-Fi network, then open the router's default gateway address from that connection. The admin address and the factory login, where one exists, sit on the label.

Plug an Ethernet cable into a LAN port on the router, or join its Wi-Fi network, then open the router's default gateway address from that connection. The admin address and the factory login, where one exists, sit on the label.

Connect by Ethernet first

Cable first, radio second. A cable gives the laptop a link the moment it seats, needs no password, and works when the Wi-Fi key is wrong.

The WAN or Internet port is the single socket that faces the modem, usually labeled Internet. Take the Ethernet cable running from the modem and seat it there. The LAN ports face your devices, and any LAN port will do. On the Verizon Router CR1000A the upstream socket is labelled Ethernet WAN, with three LAN ports beside it.

Take a second cable, push one end into a LAN port until it clicks, the other into the laptop. A solid port LED means a link; no light means a loose cable. If the modem side is the part in doubt, the cabling order is set out in connecting a router to a modem.

Or join the Wi-Fi network

SSID first. The network name and its key are printed on the same label as the admin address, usually under a Default Access, Default Settings or Default Wireless Access heading. Read them off the label, not from a list of nearby networks.

On the device, open the Wi-Fi list, tap the SSID from the label, and type the key exactly. The key is case-sensitive. Where two names appear and one carries a 5G suffix, that copy is the 5 GHz radio, which loses 44.8 dB through a heavy concrete wall, against 22.8 dB on 2.4 GHz; the plain name is the 2.4 GHz network. The routine is in changing the Wi-Fi password.

Join from a device you can hold at the router, and check the label for a look-alike character (an O against a 0) if the key fails twice.

Find the router's real address

The admin address is in a private range, on most routers 192.168.x.x and on some ISP gateways 10.0.0.1, so it answers only while the device is on the router's own network. Guessing 192.168.1.1 works on some makes and wastes time on others. The maker prints the factory address on the label, and the table below collects what each one publishes.

Factory admin address and default login by maker, from each maker's support pages, built 18 November 2026. Every address here is a factory default; the live gateway can differ.
MakerPrinted admin addressDefault login
NETGEARrouterlogin.net or 192.168.1.1; some models use 192.168.0.1admin, then the password set at setup; after a factory reset, admin / password
TP-Linktplinkwifi.net or 192.168.0.1; older models also 192.168.1.1newer models: create a password at first login; older models: admin / admin; values are on the label
Linksysmyrouter.local, linksysxxxxx.local or https://192.168.1.1admin
ASUSthe router's LAN IP, for example 192.168.50.1, or asusrouter.comfirst login sets the account and password; some models ship admin / admin
D-Link DIR seriesdlinkrouter.local or 192.168.0.1Admin, with the password field left blank
Verizon Router CR1000Amynetworksettings.com or 192.168.1.1Network Settings password from the label on the rear
Verizon Internet Gatewaymynetworksettings.com; 192.168.1.1 on CR200A and ARC-XCI55AX; 192.168.0.1 on ASK-NCQ1338 and ASK-NCQ1338FAadmin password from the label on the bottom

The label address is a starting point, not a fixed value. Some models ship a different address, and an installer may have set another. Read the live gateway instead: it is the address the device uses to leave the local network, and the router owns it.

Reading the real gateway

  1. Windows: open Settings, Network and internet, then the active adapter's properties, and read IPv4 Default Gateway. The command prompt route is ipconfig and the same field.
  2. macOS: open System Settings, Network, the active connection, Details, TCP/IP, and read the Router field.
  3. iPhone or iPad: open Settings, Wi-Fi, tap the i beside the joined network, and read Router.
  4. Android: open Wi-Fi, tap the joined network, open the pencil or Advanced panel, and read Gateway.

Put that address, or the table hostname, into the browser. The four systems are walked through in finding your router's IP address.

Open the admin page

Browser next. The address goes in the address bar at the top, not in a search box.

A bare 192.168 address can be typed as it is, padding it with http:// if the browser insists on a search. A named address such as mynetworksettings.com can throw a "Your connection is not private" screen. That screen is normal on a local device: choose Advanced, then Proceed, as Verizon tells its customers.

The login page comes from the router, so it appears even with the internet down. Enter the factory login from the table, or the password you set. Linksys asks for a password alone, NETGEAR asks for the user name admin first, and the D-Link password field stays empty at the factory. The full sequence is in logging in to your router.

Connect a phone or tablet

A phone joins the same way, through Settings with the key from the label. The admin page is a web page, so a mobile browser renders it in a narrow column.

On iOS the gateway field sits under Settings, Wi-Fi, then the i beside the network. On Android it sits under the network's Advanced panel as Gateway. Type the gateway into Safari or Chrome exactly as read. If the page refuses the smaller screen, choose Request Desktop Site from the browser menu.

Some gateways skip the browser. A Starlink router has no admin page and is managed through the Starlink app, so the phone is set up there and needs no address.

When the page will not open

Most failures are one of three: the device is on the wrong network, the password is wrong, or the address was typed from memory.

  1. Check the network. A phone still on mobile data, or a laptop on a guest SSID, cannot reach the admin address. Join the router's own SSID or fit the cable.
  2. Type the address again from the label or from the gateway field, with http:// in front if the browser insists on a search.
  3. Clear the password field and enter the factory login from the table. The NETGEAR login is case-sensitive, and the D-Link field is meant to be blank.
  4. Turn off a VPN for the attempt, because a VPN sends the private address down its own tunnel.
  5. Try a second browser or a private window, which sets aside a saved password and a stale cache.

The reset pinhole is red-zone work. On a NETGEAR router, hold the reset button with a paperclip for seven seconds while the power light is on, then release. A long hold wipes the SSID, the key and the admin password; the factory defaults return and everything else must be set up anew.

If the page opens but the router reports no internet behind it, the fault is upstream of the admin page; work through why a router is not connecting to the internet.

Questions

How do I access my WiFi router?

Join the router's network first, by cable into a LAN port or by Wi-Fi with the printed key, then enter its gateway address in a browser. The address and the login are on the label.

How do I connect to my router?

Use a cable into a LAN port, or join the SSID on the label. Then open the printed address, or the gateway, and log in with the label credentials.

How do I connect my phone to my router?

Open the phone's Wi-Fi settings, choose the SSID from the label and type the printed key. For the admin page, read the Gateway field in the same settings panel and type that address into the phone browser.

Sources

  1. kb.netgear.com: How do I log in to my NETGEAR router · checked Nov 19, 2026
  2. kb.netgear.com: How do I perform a factory reset on my NETGEAR router · checked Nov 19, 2026
  3. kb.netgear.com: How do I locate my router s IP address · checked Nov 19, 2026
  4. netgear.com: connecting cable modem and router · checked Nov 19, 2026
  5. kb.netgear.com: What do the LEDs on my NETGEAR router mean · checked Nov 19, 2026
  6. tp-link.com: 87 · checked Nov 19, 2026
  7. tp-link.com: 776 · checked Nov 19, 2026
  8. tp-link.com: 1170 · checked Nov 19, 2026
  9. tp-link.com: 2982 · checked Nov 19, 2026
  10. tp-link.com: 2253 · checked Nov 19, 2026
  11. support.linksys.com: 81 en · checked Nov 19, 2026
  12. asus.com: 1005263 · checked Nov 19, 2026
  13. dlink.com: how do i upgrade the firmware on my router · checked Nov 19, 2026
  14. verizon.com: knowledge base 239713 · checked Nov 19, 2026
  15. verizon.com: knowledge base 301456 · checked Nov 19, 2026
  16. verizon.com: verizon router guide · checked Nov 19, 2026
  17. starlink.com: f9a1d602 9204 e70c a780 f2619d99f9c7 · checked Nov 19, 2026
  18. rfc-editor.org: rfc1918 · checked Nov 19, 2026
  19. blog.ibwave.com: a closer look at attenuation across materials the 2 4ghz 5ghz bands · checked Nov 19, 2026

RouterPanel. "How to connect to a router." Updated Nov 19, 2026. https://howtosetuparouter.com/connect-to-router/